TuffTek® – the world's first cubic boron nitride coating on carbide tools and wear parts – is used in machining and manufacturing.

tutoPROM® is an (organo)-polysilazane-based anti-graffiti coating developed for concrete by Clariant.

TX Active® was developed in a collaboration between Heidelberg Cement and Italcementi. This is a self-cleaning cement due to its special formula, which is efficient in destroying atmospheric pollutants based on the photocatalytic functionality of the finished product. In Milan a commercial building’s surface, 3000 m2, is coated with TX Active® cement from Italcementi. Iglesia Dives (Church) in Misericordia, IT is a well-known building where TX Active cement was used. In addition to its self-cleaning property, TX Active® plays role in reducing pollution. Another example where recently TX Active was used for construction is the two white concrete gateway elements of the new I-35W Bridge over the Mississippi River in Minneapolis, US.

Combines a blend of glossing agents and emollient cleaning compounds to scrub and leave tyres with a long lasting satin finish. Unlike traditional tyre cleaners Tyre Shine is a non-grease formula and can also be used on plastic interior and exterior surfaces of the car body revitalising their appearance and significantly increasing colour and tone density.

G-CLEAN Ultimate Tyre Shine removes the toughest dirt and road grime from the tyre, while leaving a lasting shine that also protects the rubber surface.

Filters for dust collection. Made with an electrospinning process that produces a very fine, continuous, resilient fibre of 0.2-0.3 microns in diameter, a permanent nanofibre web is formed with very fine interfibre spaces that trap dust on the surface of the media.

UNCD® developed by ADT allows for the realisation of many different types of diamond films that capture different subsets of properties of diamond, allowing ADT the unique ability to tailor UNCD for a broad range of applications.

A colourless coating that can be used as a lacquer and offers good filling capacity and sanding properties. It is highly resistant to cleaners and alcohols and does not decolourise.

UTDAg silver nanoink is general-use ink for aerosol or ink-jet printing on variety of substrates. UTDAg is based on silver nanoparticles with average size around 10 nm and dispersed in a liquid vehicle. Since they are surface stabilized, UTDAg inks are highly soluble in nonpolar organic solvents and stable under atmospheric conditions at room temperature.

Master Bond UV22DC80 is a nanosilica-filled, dual cure epoxy-based system. It is formulated to cure readily upon exposure to UV light and will crosslink in shadowed out areas with the addition of heat. It will not cure in areas where the material is not exposed to the light. Having a dual cure mechanism allows those areas not exposed to the light being curable with the addition of heat. The thermal part of the cure is achieved at a user friendly 80°C (particularly when working with plastics). Dual cure systems are particularly useful for rapidly fixturing parts with the UV portion of the cure and then finishing the process by heating.