The core concept of the ThermoMag project revolves around developing and delivering new energy-harvesting thermoelectric materials and proof-of-concept modules, based on nanostructured bulk Mg2Si solid solutions. This class of TE material would have the following attractive characteristics: (i) ZT value >1.5 for both n-type and p-type doped material, (ii) operational in the temperature range 300-550ºC, (iii) very low density of 2 g/cm3, especially suitable for transportation applications, (iv) high melting point of >1000ºC, and good thermal stability up to 600ºC, (v) good oxidation and corrosion resistance and mechanical strength, (vi) isotropic thermoelectric properties, (vii) non-toxicity of elements, (viii) widely-available pure materials with very large EU supply chains and (ix) low raw material cost <15 Euros/kg, combined with low manufacturing costs. A number of methods will be looked at to achieve 3D bulk nanocrystalline Mg2Si including low-cost combustion synthesis, mechanical alloying and high-temperature solid-state synthesis in inert crucibles. Various ball milling approaches will be used to produce doped Mg2Si nanoparticle constituents that can then be compressed via rapid spark plasma sintering or hot pressing in vacuum. 3D nanocomposite material will also be produced with the addition or in-situ production of inert nanoparticles, as well as thin films using multilayer approaches. Doping using various elements will be predicted by ab-initio density-functional theory modelling. These methods will lead to the safe production of nanostructured n- and p-type legs for further thermoelectric and materials testing. In order to prove the concept works, demonstrator modules will be assembled that integrate the new energy-harvesting nanostructured material. Such modules have widespread applications in automotive, aerospace and manufacturing sectors, where waste heat can be usefully recovered, with clear environmental benefits.

Water immersion lithography has been widely accepted as patterning technology for the 45nm technology node, but solutions for the patterning of 32nm and 22nm technology nodes are not clear yet.

Control of matter via light has always fascinated humankind; not surprisingly, laser patterning of materials is as old as the history of the laser. However, this approach has suffered to date from a stubborn lack of long-range order. We have recently discovered a method for regulating self-organised formation of metal-oxide nanostructures at high speed via non-local feedback, thereby achieving unprecedented levels of uniformity over indefinitely large areas by simply scanning the laser beam over the surface.

This project proposes the development of a technology capable of delivering, high speed, simultaneous elemental and molecular maps of biological targets. Specifically these targets will include plaques associated with age-related macular degeneration (AMD), tumours treated with Pt-based chemotherapy drugs, and cell populations derived from the FP7 project, the ONE Study. The dual-mode imaging system will enable the analysis of metallo-proteins and their binding sites, or where there is no native metal tag or its abundance is too small to detect, anti-body or specific reactive chemistry metal or nano-particle tags will be added to the target molecules. For the ONE Study, one of the key project aims is to develop cell labelling strategies that will enable therapeutically administered cells to be tracked at low abundance in the host cell populations without toxic impact on either the therapeutic cells or host organism. The technology will be based on employing a common pulsed laser platform for laser ablation, desorption, or matrix assisted sampling of the target material simultaneously coupled with inductively-coupled plasma elemental mass spectrometry (ICP-MS) and ion trap organic mass spectrometry. In the case of the molecular mass spectrometry, electro-spray or matrix assisted charging will be used. The sampling will employ a technology developed in the host laboratory that enables targets to be sampled at atmospheric pressure whilst excluding atmosphere from the sampling point. The technology will be optimised for high speed and high efficiency to enable rapid mapping of targets at very high sensitivity. This will require development of a new high efficiency torch design for ICP-MS and the novel use of micro-jet pumps to deliver samples to the mass spectrometers. The project will also take advantage of the Fellow's expertise in synchrotron X-ray techniques to obtain non-destructive and comparative analyses of the specimen materials.

Recent developments in the design and synthesis of nanoscale building blocks as active elements in opto- or bio-electronic devices with tailored electronic functionality have the potential to open up new horizons in nanoscience and also revolutionise multi-billion dollar markets across multiple technology sectors including healthcare, printable electronics, and security. Ligand-stabilised inorganic nanocrystals (~2-30 nm core diameters) and functional organic molecules are attractive building blocks due to their size dependent opto-electronic properties, the availability of low-cost synthesis processes and the potential for formation of ordered structures via (bio) molecular recognition and self-assembly. Harnessing the complementary properties of both nanocrystals and functional molecules thus represents a unique opportunity for generation of new knowledge and development of new classes of high knowledge-content materials with specific functionality tailored for key applications, e.g., printable electronics, biosensing or energy conversion in the medium term, and radically new information and signal processing paradigms in the long term. Self-assembly and self-organisation processes offer the potential to achieve dimensional control of novel multifunctional materials at length scales not accessible to conventional “top-down” technologies based on lithography. It is critical for European industry to develop new knowledge and low-cost, scaleable processes for assembly and electrical interfacing of these multifunctional materials with conventional contact electrodes in order to produce into tailored devices and products, in particular on low-cost substrates. The FUNMOL consortium will deliver substantial innovation to European industry via development of cost-effective, scaleable processes for directed assembly of high-knowledge content nanocrystal-molecule materials into electrically-interfaced devices at silicon oxide, glass and plastic substrates.

Shape memory alloys (SMA) exhibit unique and useful effects, such as a capacity to cycle a component between two different macroscopic shapes by cycling the temperature. In the recent years MEMS components made of shape memory alloys have attracted considerable interest in the research field as they offer a high output work density and exhibit specific desirable thermomechanical effects. As a consequence, many research studies have been focused on the development of shape memory thin films which could be integrated into the planar technology of microsystems. However, there are few works in the literature where the effects of the grain size (d)/sample size (D) ratio are studied, and those that do exist are insufficient to draw general conclusions.

This research program aims at pioneering and developing new nanofabrication techniques for carbon-nanoelectronics using a so-called 'bottom-up' approach. Individual building blocks for carbon-based nanodevices, such as catalyst nanoparticles, horizontally aligned carbon-nanotubes and ultra-scaled contacts and dielectrics will be precisely placed directly on the chip, without the use of lithography. This will be accomplished by using unique combinations of electron-beam induced deposition (EBID), atomic layer deposition (ALD) and oblique ion beam treatments. The process development will go hand-in-hand with atomic level understanding of the developed processes using in-situ and ex-situ analysis techniques to ensure process reproducibility and selectivity.

The EAgLE project aims at establishing at the Institute of Physics, Polish Academy of Sciences (IFPAN) a leading multiprofile research Centre for designing and fabricating new materials, their characterization and testing under extreme experimental conditions. The Centre will identify and select novel materials, structures, phenomena, and computational protocols for functional new-concept nanodevices.

CATHERINE will provide a new unconventional concept for local and chip-level interconnects that will bridge ICT beyond the limits of CMOS technology._x000d_

The vision of PilotManu is the upscale of the current mechanical alloying technological facility into a powder manufacturing pilot line by further developing existing IPR-covered results owned by the SMEs in the consortium related to mechanical alloying technology and to innovative powder materials for different applications. The baseline technology that will be upscaled from a technological facility status into pilot scale, is the High Energy Ball Milling machine, able to deliver innovative materials for new product lines developed by SMEs and industrial partnership that will lead the technological upscale. The project will demonstrate the technological and economical viability of the pilot line by implementing advanced materials into coatings, abrasive tool and additive manufacturing applications. Additional application sectors will be represented in the business cases by analyzing the cost/benefits of using the following new materials: Mg hydrides for hydrogen storage, thermoelectrics for energy harvesting, flame retardant textile and polymer nanocomposite for rapid prototyping. The potential impact brought by the new HEBM pilot production will be transversal also in all those technological sectors demanding high performance and outstanding material properties not achievable by conventional products. These huge un-exploited knowledge reservoir related to materials produced via HEBM or Mechanical Alloying will be unlocked by the Pilot Manu production system able to bring these results into the market.